WLAN直接转发模式的配置

拓扑图如上，要求AC使用直接转发模式，管理数据使用vlan100，业务数据使用vlan101。AP的IP由AC的DHCP分配；STA的IP由SW2分配。

各设备的配置如下：

#
 set memory-usage threshold 0
#
ssl renegotiation-rate 1 
#
vlan batch 100 to 101
#
authentication-profile name default_authen_profile
authentication-profile name dot1x_authen_profile
authentication-profile name mac_authen_profile
authentication-profile name portal_authen_profile
authentication-profile name macportal_authen_profile
#
dhcp enable
#
diffserv domain default
#
radius-server template default
#
pki realm default
 rsa local-key-pair default
 enrollment self-signed
#
ike proposal default
 encryption-algorithm aes-256 
 dh group14 
 authentication-algorithm sha2-256 
 authentication-method pre-share
 integrity-algorithm hmac-sha2-256 
 prf hmac-sha2-256 
#
free-rule-template name default_free_rule
#
portal-access-profile name portal_access_profile
#
aaa
 authentication-scheme default
 authentication-scheme radius
  authentication-mode radius
 authorization-scheme default
 accounting-scheme default
 domain default
  authentication-scheme radius
  radius-server default
 domain default_admin
  authentication-scheme default
 local-user admin password irreversible-cipher $1a$cXi,6$[,5~$f@H[*GFxs6z,kYD/Ge
sI%*i&)x}lcNKG@S90q]X#$
 local-user admin privilege level 15
 local-user admin service-type http
#
interface Vlanif100
 ip address 192.168.100.1 255.255.255.0
 dhcp select interface
#
interface MEth0/0/1
 undo negotiation auto
 duplex half
#
interface GigabitEthernet0/0/1
 port link-type trunk
 port trunk allow-pass vlan 2 to 4094
#
interface GigabitEthernet0/0/2

#
 snmp-agent local-engineid 800007DB03000000000000
 snmp-agent 
#
ssh server secure-algorithms cipher aes256_ctr aes128_ctr
ssh server key-exchange dh_group14_sha1
ssh client secure-algorithms cipher aes256_ctr aes128_ctr
ssh client secure-algorithms hmac sha2_256
ssh client key-exchange dh_group14_sha1
#
capwap source interface vlanif100
#
user-interface con 0
 authentication-mode password
user-interface vty 0 4
 protocol inbound all
user-interface vty 16 20
 protocol inbound all
#
wlan
 traffic-profile name default
 security-profile name secp1
  security wpa-wpa2 psk pass-phrase %^%#wfzhVFVUj:POitNvz7a$[6H$T&g&tS!R+S+@j*V$
%^%# aes
 security-profile name default
 security-profile name default-wds
 security-profile name default-mesh
 ssid-profile name ssidp
  ssid qingmei
 ssid-profile name default
 vap-profile name vapp1
  service-vlan vlan-id 101
  ssid-profile ssidp
  security-profile secp1
 vap-profile name default
 wds-profile name default
 mesh-handover-profile name default
 mesh-profile name default
 regulatory-domain-profile name default
 air-scan-profile name default
 rrm-profile name default
 radio-2g-profile name default
 radio-5g-profile name default
 wids-spoof-profile name default
 wids-profile name default
 wireless-access-specification
 ap-system-profile name default
 port-link-profile name default
 wired-port-profile name default
 serial-profile name preset-enjoyor-toeap 
 ap auth-mode no-auth
 ap-group name apg1
  radio 0
   vap-profile vapp1 wlan 1
  radio 1
   vap-profile vapp1 wlan 1
  radio 2
   vap-profile vapp1 wlan 1
 ap-group name default
 ap-id 0 type-id 56 ap-mac 00e0-fc33-3c90 ap-sn 21023544831076043B39
  ap-name qingmei
  ap-group apg1
 ap-id 1 type-id 56 ap-mac 00e0-fc0a-78c0 ap-sn 2102354483109E4AE826
  ap-name qingmei2
  ap-group apg1
 provision-ap
#
dot1x-access-profile name dot1x_access_profile
#
mac-access-profile name mac_access_profile
#
return
<AC6605>  

#
sysname SW2
#
vlan batch 100 to 101
#
cluster enable
ntdp enable
ndp enable
#
drop illegal-mac alarm
#
dhcp enable
#
diffserv domain default
#
drop-profile default
#
aaa
 authentication-scheme default
 authorization-scheme default
 accounting-scheme default
 domain default
 domain default_admin
 local-user admin password simple admin
 local-user admin service-type http
#
interface Vlanif1
#
interface Vlanif101
 ip address 192.168.101.1 255.255.255.0
 dhcp select interface
#
interface MEth0/0/1
#
interface GigabitEthernet0/0/1
 port link-type trunk
 port trunk allow-pass vlan 2 to 4094
#
interface GigabitEthernet0/0/2
 port link-type trunk
 port trunk allow-pass vlan 2 to 4094
#
return

#
sysname SW1
#
vlan batch 100 to 101
#
cluster enable
ntdp enable
ndp enable
#
drop illegal-mac alarm
#
diffserv domain default
#
drop-profile default
#
aaa
 authentication-scheme default
 authorization-scheme default
 accounting-scheme default
 domain default
 domain default_admin
 local-user admin password simple admin
 local-user admin service-type http
#
interface Vlanif1
#
interface MEth0/0/1
#
interface Ethernet0/0/1
 port link-type trunk
 port trunk pvid vlan 100
 port trunk allow-pass vlan 2 to 4094
#
interface Ethernet0/0/2
 port link-type trunk
 port trunk pvid vlan 100
 port trunk allow-pass vlan 2 to 4094
#
interface Ethernet0/0/3
 port link-type trunk
 port trunk allow-pass vlan 2 to 4094
#
return

AP不需要任何设置。